中小项目竣工验收监测中废水总量核定的技术方法

魏玉香<sup>1</sup><sup>2</sup>

引用本文:	魏玉香.中小项目竣工验收监测中废水总量核定的技术方法[J].环境监控与预警,2011,3(03):18-20
	.Techniques of the Amount Approved of Waste Water in Acceptance Inspection of Medium and Small Projects[J].Environmental Monitoring and Forewarning,2011,3(03):18-20

【打印本页】【HTML】【下载PDF全文】【查看/发表评论】【EndNote】【RefMan】【BibTex】

←前一篇|后一篇→

过刊浏览高级检索

本文已被：浏览 12650次下载 2554次	码上扫一扫！
分享到：微信更多字体:加大+\|默认\|缩小-
中小项目竣工验收监测中废水总量核定的技术方法
魏玉香^1,2
1.南京大学环境学院，江苏南京 210046;2.南京市环境监测中心站，江苏南京 210013

摘要:

针对验收监测中废水总量核定存在的问题，根据中小项目环保验收的实践，对应排污口是否安装在线监测设备、是否具备测流条件等情况，分别提出了验收监测中相应的的废水总量核定技术。具有很好的的可操作性。

关键词: 环保验收监测总量核定建设项目

DOI：

分类号:

基金项目:

Techniques of the Amount Approved of Waste Water in Acceptance Inspection of Medium and Small Projects

Abstract:

In order to solve the problems in medium and small projects, such as whether the online monitoring equipments should be installed on the outlets of waste water and whether the condition for flow assay was obtained, the relative approval techniques on waste water volume has been proposed. The method has been tested to be operational with comparative reliability in practice.

Key words: environmental acceptance inspection total volume approval Project