Multi N/C 2100S总有机碳分析仪校准方法的建立

王琳; 孙国鼐

引用本文:	王琳，孙国鼐.Multi N/C 2100S总有机碳分析仪校准方法的建立[J].环境监控与预警,2011,3(04):9-11
	.Establishment of the Method for Calibrating Total Organic Carbon Analyzer[J].Environmental Monitoring and Forewarning,2011,3(04):9-11

【打印本页】【HTML】【下载PDF全文】【查看/发表评论】【EndNote】【RefMan】【BibTex】

←前一篇|后一篇→

过刊浏览高级检索

本文已被：浏览 12237次下载 2263次	码上扫一扫！
分享到：微信更多字体:加大+\|默认\|缩小-
Multi N/C 2100S总有机碳分析仪校准方法的建立
王琳，孙国鼐¹
天津市环境监测中心，天津 300191

摘要:

以德国Analytikjena公司Multi N/C 2100S分析仪为例，研究建立了合理可行的总有机碳分析仪校准方法。在总有机碳分析仪检定规程JJG 821-2005的基础上增加零点漂移、直线性、标准曲线线性和检出限4项特性指标，改变了准确性特性的判定方法；根据仪器的使用频率和稳定性，建议校准周期不超过2年。

关键词: TOC 总有机碳分析仪校准方法

DOI：

分类号:

基金项目:

Establishment of the Method for Calibrating Total Organic Carbon Analyzer

Abstract:

With Multi N/C 2100S analyzer from Analytikjena, established the method for calibrating total organic carbon (TOC) analyzer. In addition to the parameters in TOC analyzer procedures (JJG821-2005), 4 indexes were added in the method, including zero drift, linearity, correlation with standard curve and examination limit. At the same time, the determination of accuracy was changed. According to the use frequency and stability of apparatus, it is suggested that the calibrating cycle should not be over 2 years.

Key words: TOC total organic carbon analyzer calibration method