| 摘要: |
| 建立了一种利用固相萃取法对固体废物浸出液(TCLP)中二硝基苯进行萃取，DB-5石英毛细管柱(30 m×0.25 mm×0.25 μm)进行分离，质谱检测器检测二硝基苯的方法。方法在0.002 0~0.020 0 mg/L之间线性关系良好，二硝基苯三种同分异构体的检出限均为0.5 μg/L，模拟样品加标回收率为93%~96%，RSD≤2%；实际固体废物样品测定的加标回收率为95%~98%。 |
| 关键词: 固体废物 浸出毒性试验方法 二硝基苯 固相萃取 气质联用法 |
| DOI： |
| 分类号:O657.63 |
| 文献标识码:B |
| 基金项目:国家水体污染控制与治理科技重大专项基金资助项目（2012ZX07301-005）；江苏省环境工程重点实验室开放课题基金资助项目（2012） |
|
| Determination of Dinitrobenzene in TCLP of Solid Waste by Solid Phase Extraction Coupling with GC/MS |
|
WU Wei,YU Ang,ZHAO Shanshan1,2
|
|
1.Jiangsu Provincial Academy of Environmental Science, Nanjing, Jiangsu 210036, China;2. Jiangsu Key Lab of Environmental Engineering, Nanjing, Jiangsu 210036, China
|
| Abstract: |
| A method was established for the determination of dinitrobenzene in Toxicity Characteristic Leaching Procedure (TCLP) of solid waste. The sample was extracted by SPE, separated by DB 5 quartz capillary column (30 m×0.25 mm×0.25 μm), and detected by mass spectrometer. The relevant analytical parameters were optimized. Good linear relationship was obtained in the range of 0.002 0 mg/L~0.020 0 mg/L. The detection limits of three dinitrobenzene isomers were all 0.5 μg/L, and the recovery rates were between 93%~96% and RSD≤2%. For the determination of solid waste samples, the recovery rates were between 95%-98%. |
| Key words: Solid waste TCLP Dinitrobenzene SPE GC/MS |
